page 1 DNP325-4 through-hole ired/ 5 high radiant intensity type recommended applications electric household appliances, oa/fa, pc/peripheral equipment, other general applications ? high radiant intensity : 80mw typ. (i f =50ma) ? high speed : cut-off frequency 12 typ. mhz (i f =50ma) ? narrow distribution ? lead?free soldering compatible ? rohs compliant peak wavelength 880nm product features die materials gaalas 10 deg. features package 5 type, water clear epoxy rank grouping parameter soldering methods esd packing ttw (through the wave) soldering and manual soldering please refer to soldering conditions about soldering. 2kv (hbm) bulk : 200pcs(min.) sorted by radiant inte nsity per rank taping half intensity angle 2006.8.31
absolute maximum ratings item symbol unit power dissipation pd mw forward current i f ma pulse forward current 1 i fr m ma S i f ma/ S i frm ma/ reverse voltage v r v operating temperature t opr storage temperature t stg 1 ifrm measurement condition : pulse width Q 100 s, duty Q 1/100 electro-optical characteristics conditions typ. 1.4 max. 1.6 reverse current v r =5v i r max. 100 a min. 40 typ. 80 total output power i f =50ma po typ. 13 mw peak wavelength i f =50ma p typ. 880 nm spectral half-width i f =50ma S typ. 40 nm half intensity angle i f =50ma 2 1/2 typ. 10 deg. min. - typ. 12 response time i f =50ma tr/tf typ. 30 ns pulse forward voltage i fr m =500ma v fm max. 3.4 v mhz cut-off frequency i f =50ma dc 5ma, -3db from 0.1mhz radiant intensity i f =50ma i e fc v mw/sr unit forward voltage i f =50ma v f absolute maximum ratings 150 100 1,000 derating (ta=25 or higher) item symbol characteristics 1.33 13.3 5 -30~+85 -30~+100 page 2 through-hole ired/ 5 high radiant intensity type DNP325-4 2004.11.17 (ta=25 ) (ta=25 )
radiant intensity rank page 3 t please contact our sales staff concerning rank designation. 2004.11.17 DNP325-4 (ta=25 ) min . ma x . a4080 b56112 c80160 d 112 224 e 160 320 rank i f = 50ma i e mw/s r condition through-hole ired/ 5 high radiant intensity type
page 4 2004.11.17 DNP325-4 technical data spatial distribution example condition : ta = 25 through-hole ired/ 5 high radiant intensity type spectral distribution relative intensity vs. wavelength condition : ta = 25 , i f = 50ma wavelength [nm] relative intensity forward voltage vs. forward current condition : ta = 25 forward voltage : v f (v) forward current i f (ma) duty ratio vs. pulse forward current condition : ta = 25 , tw Q 100 s duty ratio pulse forward current i frm (a)
page 5 2004.11.17 technical data ambient temperature vs. pulse forward current condition : tw Q 100 s, duty Q 1/100 ambient temperature : ta( ) ambient temperature vs. forward current ambient temperature : ta( ) forward current : i f (ma) ambient temperature vs. forward voltage condition : i f = 50ma ambient temperature : ta ( ) pulse forward current i frm (ma) forward voltage v f (v) ambient temperature vs. peak wavelength condition : i f = 50ma ambient temperature : ta( ) peak wavelength p(nm) DNP325-4 through-hole ired/ 5 high radiant intensity type
page 6 2004.11.17 technical data forward current vs. relative total power condition : - - pulse, tw Q 100 s, duty Q 1/100, ta = 25 forward current : i f (ma) relative total power frequency condition : ta = 25 , i f = 50ma dc 5ma frequency (mhz) relative radiant intensity (db) ambient temperature vs. relative total power condition : i f = 50ma ambient temperature : ta ( ) relative total power pulse forward voltage vs. pulse forward current condition : ta=25 , tw Q 100 s, duty Q 1/100 pulse forward voltage : v fm (v) pulse forward current : i frm (ma) DNP325-4 through-hole ired/ 5 high radiant intensity type
package dimensions page 7 (unit: mm) 2004.11.17 DNP325-4 through-hole ired/ 5 high radiant intensity type
DNP325-4 page 8 through-hole ired/ 5 high radiant intensity type ttw (through the wave ) soldering conditions solder bath temp. dipping time 265 5 s (max.) (max.) position at least 3.0 mm away from resin body iron tip temp. soldering time and frequency 3 s 1 time 400 (max.) (max.) (max.) (30 w max.) position at least 3.0 mm away from resin body 2006.3.31 pre-heating 100 (max.) resin surface temperature 1) the dip soldering process shall be 2 times maximum. 2) the product shall be cooled to normal temperature before the second dipping process. the detail is described to led and photodet ector handling precautions of home page: "mounting through-hole type devices? and "soldering", and use it after the confirmation, please. manual soldering conditions the detail is described to led and photodet ector handling precautions of home page: "mounting through-hole type devices? and "soldering", and use it after the confirmation, please.
DNP325-4 page 9 through-hole ired/ 5 high radiant intensity type reliability testing result failure criteria items symbols conditions failure criteria luminous intensity iv i f value of each product luminous intensity testing min. value spec. min. value x 0.5 forward voltage v f i f value of each product forward voltage testing max. value R spec. max. value x 1.2 reverse current i r v r = maximum rated reverse voltage v testing max. value R spec. max. value x 2.5 cosmetic appearance - - no notable, decoloration, deformation and cracking 2006.8.31 reliability testing result applicable standard testing conditions duration failure room temp. operating life eiaj ed- 4701/100(101) ta = 25 , i f = maxium rated current 1,000 h 0/25 resistance to soldering heat eiaj ed- 4701/300(302) 265 5 , 3mm from package base 10sec 0/25 temperature cycling eiaj ed- 4701/100(105) minimum rated storage temperature(30min) normal temperature(15min) maximum rated storage temperature(30min) normal temperature(15min) 5 cycles 0/25 wet high temp. storage life eiaj ed- 4701/100(103) ta = 60 2 , rh = 90 5% 1,000 h 0/25 high temp. storage life eiaj ed- 4701/200(201) ta = maximum rated storage temperature 1,000 h 0/25 low temp. storage life eiaj ed- 4701/200(202) ta = minimum rated storage temperature 1,000 h 0/25 lead tension eiaj ed- 4701/400(401) 10n,1time ( 0.4 and flat package : 5n) 10sec 0/10 vibration, variable frequency eiaj ed- 4701/400(403) 98.1m/s 2 (10g), 100 2khz sweep for 20min., xyz each direction 2 h 0/10
special notice to customer s using the products and technical information shown in this data sheet 1) the technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. it does not co nstitute the warranting of industrial property nor the granting of any license. 2) for the purpose of product improvement, the specific ations, characteristics and technical data described in the data sheets are subject to change without prior no tice. therefore it is recommended that the most updated specifications be used in your design. 3) when using the products described in the data sh eets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. we ar e not responsible for any damage which may occur if these specifications are exceeded. 4) the products described in the data sheets are made to be used in stan dard electronic applications such as office automation appliances, commu nication devices, audio visual, home appliances, and measuring instruments. 5) if the products in the data sheets are to be used for purposes other than the above which requires high level reliability and safety where failure and or malfunction of the product may cause deat h or other serious effects on the human body such as airplane, space activity, transportation, medical, nuclear), please contact our sales personnel. 6) in order to export the products or technologies de scribed in this data sheet which are under the ?foreign exchange and foreign trade control law,? it is necessary to first obtain an export permit from the japanese government. 7) no part of this data sheet may be reprinted or reproduced without prior written permission from stanley electric co., ltd. 8) the most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2004.11.17 DNP325-4 page 10 through-hole ired/ 5 high radiant intensity type
|
